Quick Lookups

The Quick Lookups icon is located on the Home screen. This feature provides access to vehicle manufacturer, Engine Oil Specifications, Oil Service Reset Information, Tire and Wheel Service Information and TPMS Reset Information

 

   Wi-Fi is Required to Use This Application !      See Wi-Fi Connection*

 

Oil Specs and Resets

Home Screen: Quick Lookups > Oil Specs and Resets

The Oil Specs and Resets information service provides up-to-date OEM information on your diagnostic tool. Quick Lookups provides both OEM information and Scanner functions in one place.

Typical OEM information provided:

● Oil capacity and specifications
● Oil Service reset procedures and information
● Scanner Functional Resets


— Oil Specs and Resets vehicle coverage is the same as the Scanner vehicle coverage.

— Not all vehicles may have on-board diagnostic tool reset capabilities, or have information available.

— To use the Oil Specs and Resets feature you must have authorized access, contact your sales representative for details.

— The diagnostic tool is equipped with the ability to connect to a Wi-Fi network, however the connection is solely dedicated to our Snap-on Information Service Network. Before you begin using an integrated Information Service you must connect to a wireless network.

— If you experience a wireless network connection loss, Oil Specs and Resets information will not refresh and/or may cause the function to stop. To continue use, you must re-establish your Internet connection.

— Performance may vary depending on your wireless network equipment and ISP.

Operation

There are two methods to access Oil Specs and Resets:

1. From the Home screen - select the Quick Lookups icon, then select Oil Specs and Resets.

2. From within a current Scanner session - select Oil Specs and Resets from the System menu.

Follow the screen prompts to ID the vehicle, then select an option:

– Perform a service interval reset using the diagnostic tool.
– View OEM service reset instructions and related information.

Fluid Capacity

Selecting the Fluid Capacity icon displays OEM recommended engine oil and capacity information.

Typical information may include:

● Vehicle application information
● Oil capacity specifications with or without oil filter
● Oil rating, weight and type
● Special notes

Functional Reset

Selecting the Functional Reset icon opens the service interval reset menu (within the Scanner function) for the selected vehicle, and includes functional resets for the oil service indicator and other supported resets.

 

Instructions may be provided, that are required to be performed before selecting or completing the reset function itself. Follow all instructions as written.

Functional resets are not available for all vehicles, and will vary depending on vehicle support.

A “grayed out” or non-selectable icon indicates that functional resets are not available for the selected vehicle.

Service interval reset menus and selections, will vary by manufacturer.

1. Select the Functional Reset icon.
2. Select the applicable menu option(s) to perform the functional reset.
3. Read and perform any instructions that are provided.
4. If applicable, once the reset has completed select OK or Continue.

The following screen examples illustrate typical indicator reset screens.

Reset Procedure

Selecting the Reset Procedure icon displays OEM oil service reset instructions.

Typical information may include:

● Step-by-step instructions for manually resetting the oil service reset indicator using on-board vehicle functionality (e.g. instrument cluster controls, accelerator pedal, information or media center controls, multi-function switch, etc.)
● Special notes, and/or instructions
● Theory of operation

The following are examples of typical oil service reset instructions.

Tire and Wheel Service

Home Screen: Quick Lookups > Tire and Wheel Service

The Tire and Wheel Service Information Service provides up-to-date information on your diagnostic tool. This feature allows you quick access to the following information:

● Tire Pressure Monitoring System (TPMS) Indicator Reset Procedures
● TPMS Relearn Procedures
● Tire Pressure Sensor Removal/Installation Procedures
● Tire Fitment Specifications

The following may also be available when connected to a vehicle:

● View and Clear TPMS Related Codes
● View TPMS Related Data
● Perform TPMS Related Functional Tests
● View TPMS Troubleshooter Information


— Tire and Wheel Service vehicle coverage is the same as the Scanner vehicle coverage.

— Not all vehicles may have on-board diagnostic tool reset capabilities, or have information available.

— To use the Tire and Wheel Service feature you must have authorized access, contact your sales representative for details.

— The diagnostic tool is equipped with the ability to connect to a Wi-Fi network, however the connection is solely dedicated to our Snap-on Information Service Network. Before you begin using an integrated Information Service you must connect to a wireless network.

— If you experience a wireless network connection loss, Tire and Wheel Service information will not refresh and/or may cause the function to stop. To continue use, you must re-establish your Internet connection.

— Performance may vary depending on your wireless network equipment and ISP.

Operation

There are two methods to access Tire and Wheel Service:

1. From the Home screen - select the Quick Lookups icon, then select Tire and Wheel Service.
2. From within a current Scanner session - select Tire and Wheel Service from the System menu.
3. Follow the screen prompts to ID the vehicle, then select an option.

TPMS Indicator Reset

Selecting the TPMS Indicator Reset icon displays TPMS indicator reset instructions.

Typical information may include:

● Instructions for manually resetting the TPMS indicator using on-board vehicle functionality.
● Special notes, and/or instructions
● Theory of operation

The following example shows typical TPMS indicator reset instructions.

TPMS Remove & Repair (TPMS Service)

Selecting the Remove & Repair (TPMS Service) icon displays TPMS service information.

Typical information may include:

● Removal and installation instructions.
● Relearn/enable procedures
● Diagnostic testing procedures
● Theory of operation

The following are examples of typical TPMS service procedures.

Scanner Functions

  Selecting the Scanner Function icon opens the TPMS Scanner test menu for the selected vehicle.

Options may include:

● View and Clear Codes
● View Data
● Perform TPMS Related Functional Tests/Resets
● View TPMS Troubleshooter Information

Functional test instructions may be provided, that are required to be performed before selecting or completing the function itself. Follow all instructions as written.

Scanner functions require connection and communication with the vehicle.
Functional tests/resets are not available for all vehicles, and will vary depending on vehicle support.
A “grayed out” or non-selectable icon indicates that functional resets/rests are not available for the selected vehicle.
Service test/reset menu titles will vary by manufacturer.

The following screen examples illustrate some typical TPMS functional test screens.

Tire/Wheel Specifications (Fitment)

Selecting Tire/Wheel Specifications displays OEM tire and wheel specifications.

Typical information may include:

● Tire size and pressure
● Wheel hub stud size and lug torque
● Wheel size